Leading wire forming machine manufacturer specializing in the development of welding technology.
A useful double torsion spring forming machine trial begins with an unambiguous part definition. Two coils connected by a bridge create relationships that a single diameter dimension cannot describe. Provide the controlled drawing and a three-dimensional model when available. Identify coil diameters, active turns, bridge shape, spacing and both legs. Mark critical assembly interfaces so the supplier understands which dimensions govern fit and function.
Describe the winding hand of each coil from a stated viewpoint. Include a sketch with a viewing arrow rather than relying on left and right labels alone. Define how the legs relate to the bridge and which direction they move during assembly. A mirrored spring can resemble the intended part while loading incorrectly. Resolve orientation questions before tooling is prepared or trial wire is consumed.
Explain how the spring sits on its shafts or supports and where the bridge contacts the assembly. Provide the mating geometry or a representative fixture when practical. Define the surfaces or features used to locate the part during inspection. Clearance should be reviewed through the intended movement, including potential contact between coils, legs and adjacent components. A free-state dimensional check cannot replace a functional fit review.
Specify wire grade, diameter, supply condition and lot traceability. Describe any planned stress relief, heat treatment, coating or other finishing operation and identify who controls it. The spring geometry and performance should be evaluated at the agreed stage in that route. Do not assume an as-formed sample demonstrates the final delivered condition. Processing temperatures and times must come from the approved material and spring specification.
The bridge and second coil can restrict access for forming tools. Ask the supplier to review the forming sequence, cut position and clearance around already formed features. The guide to CNC spring forming machine axes is relevant because the required motions matter more than the advertised axis count alone. Review the 4-axis CNC versatile spring coiling machine as a candidate, with suitability subject to the actual drawing and a representative trial.
Define free-state leg angles and dimensions independently from functional torque or load requirements. Specify the loading fixture, movement direction, reference position and measurement points for functional inspection. If both spring sides are evaluated, identify whether they are loaded together or separately. Agree any settling or conditioning procedure in advance. Use qualified personnel and appropriate equipment; avoid forcing a spring beyond its specified travel during an informal demonstration.
Request a sequence of representative samples under a documented configuration. Identify trial adjustments and separate setup pieces from the final acceptance group. Record machine, tools, program revision, material lot and subsequent processing. Inspect the critical dimensions and functional characteristics using the same procedure for each accepted sample. A single attractive sample is insufficient evidence of repeatable production across a batch.
List accepted characteristics, deviations and required follow-up work. Keep photographs, measurement records and the approved configuration together. Agree whether another trial is required after a material, tooling or process change. Send Jinchun Machine the drawing, mating details, material specification and intended quantity before requesting a quotation. This gives the supplier a concrete basis for reviewing tooling and trial scope without promising performance from a generic machine description.
Related Articles: