Leading wire forming machine manufacturer specializing in the development of welding technology.
Stacking supports one basket above another in its use position. Nesting allows empty baskets to enter each other for storage or transport. Some designs switch between these states through handles or supports. Define the state, permitted orientation, insertion depth and intended contact points before checking nesting clearance.
Two baskets can fit in one orientation and bind when reversed. Same-batch pairs may also fit while mixed-batch pairs do not. Acceptance should describe the delivered surface condition and the allowed contact pattern, not simply require that two convenient samples go together.
Label each basket and insert one into another using the agreed handling method. Stop when unintended resistance appears rather than forcing the pair together. Photograph or sketch the contact location. Forcing can deform the basket and destroy evidence of the original interference.
Check wall taper at corresponding heights, rim geometry, diagonals and feet. Distinguish designed nesting stops from accidental contact. A design may require contact at a stop while requiring clearance elsewhere, so a single overall gap cannot describe the complete fit.
Inspect protruding welds, wire ends and local distortion near the contact point. A nominally correct wall angle does not prevent a twisted rim or raised joint from blocking insertion. Compare before and after welding where practical to locate the stage that changes the geometry.
When finishing is applied, verify the final coated parts. Both opposing surfaces can consume clearance, and local buildup may differ from an open straight section. Do not subtract an assumed uniform coating thickness from every gap and treat the result as proof of fit.
Build a pairing record using identified samples from different production lots or setups. Note which basket is inserted, orientation, nesting depth and the location of resistance. Reverse the pairing where allowed. Test the specified nesting quantity rather than extrapolating a full stack from one pair.
If insertion or withdrawal force matters, define the instrument, direction, speed and support method. Descriptions such as tight or easy help locate a problem but are weak acceptance criteria without a common procedure. Agree limits with the product owner; there is no universal acceptable nesting force.
Send Jinchun Machine basket drawings, coating requirements, representative pairs and the production mix. Verify individual basket dimensions and interaction between finished baskets. A forming machine reference alone does not establish the scope or performance of a complete basket line.
Use this related guide when joining changes basket geometry. See welding deformation checks.
Review equipment for formed and welded components and confirm basket-specific tooling. See 3D wire forming and welding machine.
Related Articles: